Bernina Stitch Regulator

I bought a Bernina 440 many years ago when they first came out with the Bernina Stitch Regulator (BSR).  At that time I was doing a lot of quilting on my domestic sewing machine and I thought that this new foot would take my quilting to the next level.  Well, it was too slow and clunky for me, so I didn't use it.  Several years ago, I got a Bernina 570 machine and it also came along with a BSR.  I never used it either.

So, this year, I decided that I would give it a try on my newer machine and if it just wasn't going to work for me, that I would sell both of the stitch regulators and get them out of my sewing room.

I watched several videos on YouTube about how to use the BSR and got myself jacked up and ready to go.  But, as luck would have it, my sewing machine broke.  The spring that operates the presser foot went SPROING!  

So, while the newer machine was in the shop, I pulled out my 440 and tried to used the BSR.  There's supposed to be two modes, one with the needle that only moves when you move the fabric, and one where the needle keeps going up and down.  I could only figure out how to find one of the modes on the 440.  In mode one, it was just as slow and clunky as I remembered it to be.    So, no way its going to be used on the 440.

I got the 570 back from the shop and tried the BSR in both modes. Nope.  Still isn't working the way that I would have hoped.  I posted them for sale on our Clark County Facebook page and if I don't get a sale there, I'll put them on Facebook Marketplace.  Wish me luck!

Mod Squad Challenge - 2025 - part two

This is a continuation of a previous post about the making of the 2025 Mod Squad Challenge.

I pulled a few pictures off the internet and landed on one for this challenge.  I used that as my idea and drafted up a couple of designs to fit the 2' wide requirement.

I liked the one with 3 rows the best, so that is what I used to make the foundation pattern for the triangles.  Well, first, I did a little math to make sure that 2 yards would be enough for this pattern.  And yes, I had plenty.  Did I tell you that I like to do math and drafting?  This exercise was right up my ally.

I made up a sheet of the triangle foundations and copied them onto Carol Doaks Foundation Paper.  I also made some cutting templates out of freezer paper, by adding 3/8" to all of the outside edges.    Since I had triangles going in opposite directions, I made the templates for each foundation and marked them as "A" or "B".  I also added directional arrows to be sure to cut them on the grain of the fabric.

Its hard to see in this picture, but following a method that I learned from way back, I placed a post card along the seam line and used the Add-A-Quarter ruler to trim the seam to 1/4".  This was them matched up with the next piece of fabric and sewn.

You can see the sewn seam in this picture.  

The whole piece was then pressed and trimmed.

I placed the completed foundation pieces on the design board, making sure that the color placement was just right.

The final step in piecing the top was to sew the strips together and add the outer borders.  Here is the finished top.  It measures 24" W x 38" H.

I hope you like it so far, and I will show it to you again after it gets quilted.

Nightingale quilt pattern by Brittany Lloyd

I purchased a quilt pattern called "Nightingale" by Brittany Lloyd through Lo & Behold Stitchery at QuiltCon in February.  I usually don't sew patterns, but this one was really modern and sweet.  Their booth at QuiltCon was also very modern and busy with shoppers.  I succumbed.  What can I say?

I pulled fabrics from my stash in shades of purple, orange, gray and pink.  The background was a light grunge.  It was an easy pattern to follow and used modern techniques for half square triangles and flying geese.  The pattern is written for several sizes.  I made the large throw, which is 60" x 75".

Here is the top all ready to get quilted.

I hope you like it!

Mod Squad Challenge - 2025

The Mod Squad group in Vancouver decided on their next challenge for 2025.  We originally were going to start with a purple fabric that was named as the color of the year by Kaufman Kona, which is Nocturne.  

One of our members was able to get material wholesale, but only with Moda.  So she ordered 2 bolts of a very similar color called Terrain Iris.  I can't tell from the pictures off the internet, but it sure doesn't look like the same purple to me.  Nocturne looks reddish purple, while Terrain Iris looks bluish purple.  One is warm and the other is cool.  Oh well, I'll go with what the group is doing.

The parameters of the challenge not only require the use of this purple fabric, but also require the use of 3 more fabrics that match paint chips.  Each person needs to find paint chips that match the initials of their name.  In my case, that would be J for Joanne; A for Adams; and R for Roth.  Then, we will find fabric that closely resembles those paint chips.  We decided on vertical quilts that are 2' wide and up to 60" long.  The piece must be modern and the due date is September.

I had a packet of paint chips from Sherwin Williams and picked the following colors to match my initials:

J = Jonquil, #6674

A = Avid Apricot, #6639

R = Retro Mint, #9036

I also found the paint chip that most closely matches the fabric:

Fully Purple #6983

And here are the fabrics and paint chips together:

Finally, here are the fabrics that I pulled from my stash that match those colors and some very close to them.

At this point, I have no idea what I will make, but I'm sure it will be fun and new.